Search found 567 matches

there is a vw audi breakers near littlehampton or worthing (cant remember) which is very good, heres a link to his ebay page http://stores.ebay.co.uk/volkswagen-audi-spares heres the phone number, i w ...

what has been put on the end of the exhaust gases testing tube? cant work out why somebody would put a filter on it as it should not be open to the air? normally the blue plug closes it up

i can tell somebody has had a problem before with the car as the lock had been drilled before so the barrel can be removed. i find it hard to justify the price for genuine parts, i know there not ove ...

finally got the beast back on the road again! you are right about the aftermarket parts, the new barrel was making the mechanism stiff so i used the original barrel, took the broken part from the new ...

hi mike, yes, matched part numbers, car started fine a few times. do you think it could have something to do with the switch, tried with the old switch and no joy. the new one does what is should, its ...

hi folks, merry xmas, my ignition barrel and switch broke last week, whilst fitting the new ones i was turning the engine over, start stopping alot, as the new parts wheren't working 100 percent then ...

injector failed? valve or Tappet could be lots of things, hows everything ,oil coolant, fuel, plugs, leads, just wild guesses without more info and checks, anything played up or replaced recently.

i think the manufacturers fine tune the shocks/springs and aftermarket make an all rounder

i just double checked and it says rear sports 4a0 513 031D yellow ael etc avant, did a web search and defo rear

do you know what colour yours is marked with? my etka lists two types for AEL, sport yellow mark b 4A0 513 031D, or white ,std?, b 4a9 513 031C, hth.

try this, http://translate.googleusercontent.com/translate_c?depth=1&hl=en&prev=/search%3Fq%3Daudi%2Bcabrio%2Bforum%26rls%3Dcom.microsoft:en-gb:IE-Address%26rlz%3D1I7HPEA_en-GBGB231%26biw%3D10 ...

hi and welcome, sorry i cant ell you about the wiring and common problems for the gauges, but im guessing that as its only one of the gauges playing up it probably the sendor not the wiring loom, here ...

the alarm control unit is either next to the alarm horn on a mounting plate or the alarm ecu is built in with the central locking pump and infrared keyfob locking system, i dont know if audi can get t ...

did you get a quote? how much?

As you are doing all the front, have you done the rear mounts / bushes? the play in the rear axle on my original bushes was terrible, now i have fitted poly bushes the axle is solid, try jacking up th ...

the L E D where the same T5 type bulb from ebay,like this http://www.ebay.co.uk/itm/10x-White-T5-286-LED-Bulbs-Dash-Speedo-Cig-Lighter-/261312439888?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3 ...

the door contacts are easy to check, just remove rubber then one screw, maybe the wire goes from one switch to the next and is broken?
i used l e d bulbs for my demist/hazard switches and maybe you ...

hi and welcome, i think the small parts that hold the centre of the steering wheel are hard to find, i have seen some on uk ebay but probably costs the same as a good second hand wheel. i think the d ...

try contacting audibits on ebay he may have the pipe you need, more info needed for anybody to work out what pipe you need, what engine? year?. some diagrams are general and not exact picures to every ...

all the internal stuff yes, most engine hardware wont matter, but all the piping and fittings will have to be for the LHD, so you need a LHD same engine and close year match for a retro fit,

i found the fuel filter bolts needed another tighten when i did mine, normal open ended spanners are just about ok, flare nut spanners make it easier . think the torque spec is 25 - 30 nm

i am guessing but i think the air con system must be the same in the 80 saloon and coupe for the same year, you will just have to look for a 2.3l to get what you want.

there are only three things it can be, the bomb, the hydrualic servo or the pas/hydrualic system pump, assuming the calipers and hydro pipes are fine. maybe the switch/sensor for the brake/hydro press ...

no is the quick answer, most parts are good but you need all the bits for the 5 cyl engine, the 4 cly is very different, i think all the stuff inside the car will be fine but the engine stuff wont wor ...

you colud buy something like this http://www.ebay.co.uk/itm/Audi-80-Full-Air-Con-System-2-6-V6-2-8-V6-Coupe-Avant-Cabriolet-Breaking-Car-/360788046084?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=ite ...

i think you need the sub frame ,drive shafts and shocks/springs /struts for the 2.0e to v6 swap dont know if fuel pump is the same pressure and where is the battery on the v6? i know the 2.0e 8v and 1 ...

one extra thing i would do whilst the heater box is out is have a good look at the control flaps because the foam stuff on them crumbles/ falls apart and then you just get warm air going everywhere, w ...

have you tried an engine diagnostic fault read? i know the ecu temp sensor can cause similar problems with other audi models of same age. hows all the usual leads, plugs, vacuum hoses, etc ? try this ...

dont know what type of lights your looking for but think the ones from this are right? http://www.ebay.co.uk/itm/Audi-80-Avant-Quattro-/231081668205?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3 ...

i didn't think the parts would be so hard to find, there is a guy on ebay that breaks audi 80 coupes regularly called audibits, i have messaged him for parts not listed and he has been helpful, dont k ...

Author	Message
Topic: Recommended UK Breakers for spares. Audi 80 2.0e Couple. ABK
merton Replies: 2 Views: 8835	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Sat Oct 04, 2014 9:25 pm Subject: Recommended UK Breakers for spares. Audi 80 2.0e Couple. ABK
merton Replies: 2 Views: 8835	there is a vw audi breakers near littlehampton or worthing (cant remember) which is very good, heres a link to his ebay page http://stores.ebay.co.uk/volkswagen-audi-spares heres the phone number, i w ...
Topic: Plug help
merton Replies: 16 Views: 21591	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Wed Dec 18, 2013 6:22 pm Subject: Plug help
merton Replies: 16 Views: 21591	what has been put on the end of the exhaust gases testing tube? cant work out why somebody would put a filter on it as it should not be open to the air? normally the blue plug closes it up
Topic: ignition transformer
merton Replies: 6 Views: 11984	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Wed Dec 18, 2013 1:54 pm Subject: ignition transformer
merton Replies: 6 Views: 11984	i can tell somebody has had a problem before with the car as the lock had been drilled before so the barrel can be removed. i find it hard to justify the price for genuine parts, i know there not ove ...
Topic: ignition transformer
merton Replies: 6 Views: 11984	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Wed Dec 18, 2013 10:55 am Subject: ignition transformer
merton Replies: 6 Views: 11984	finally got the beast back on the road again! you are right about the aftermarket parts, the new barrel was making the mechanism stiff so i used the original barrel, took the broken part from the new ...
Topic: ignition transformer
merton Replies: 6 Views: 11984	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Sun Dec 15, 2013 4:25 pm Subject: ignition transformer
merton Replies: 6 Views: 11984	hi mike, yes, matched part numbers, car started fine a few times. do you think it could have something to do with the switch, tried with the old switch and no joy. the new one does what is should, its ...
Topic: ignition transformer
merton Replies: 6 Views: 11984	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Sun Dec 15, 2013 12:39 pm Subject: ignition transformer
merton Replies: 6 Views: 11984	hi folks, merry xmas, my ignition barrel and switch broke last week, whilst fitting the new ones i was turning the engine over, start stopping alot, as the new parts wheren't working 100 percent then ...
Topic: Weired clicking noise comes from engine when accelerating
merton Replies: 2 Views: 7770	Forum: Audi Cabriolet Posted: Wed Dec 04, 2013 8:31 pm Subject: Weired clicking noise comes from engine when accelerating
merton Replies: 2 Views: 7770	injector failed? valve or Tappet could be lots of things, hows everything ,oil coolant, fuel, plugs, leads, just wild guesses without more info and checks, anything played up or replaced recently.
Topic: quattro avant rear dampers
merton Replies: 10 Views: 25833	Forum: Audi 100, 200, A6, S4 (Audi 100 based) and V8 Posted: Tue Dec 03, 2013 8:19 pm Subject: quattro avant rear dampers
merton Replies: 10 Views: 25833	i think the manufacturers fine tune the shocks/springs and aftermarket make an all rounder
Topic: quattro avant rear dampers
merton Replies: 10 Views: 25833	Forum: Audi 100, 200, A6, S4 (Audi 100 based) and V8 Posted: Sun Dec 01, 2013 2:31 pm Subject: quattro avant rear dampers
merton Replies: 10 Views: 25833	i just double checked and it says rear sports 4a0 513 031D yellow ael etc avant, did a web search and defo rear
Topic: quattro avant rear dampers
merton Replies: 10 Views: 25833	Forum: Audi 100, 200, A6, S4 (Audi 100 based) and V8 Posted: Sat Nov 30, 2013 8:58 pm Subject: quattro avant rear dampers
merton Replies: 10 Views: 25833	do you know what colour yours is marked with? my etka lists two types for AEL, sport yellow mark b 4A0 513 031D, or white ,std?, b 4a9 513 031C, hth.
Topic: Electrical issue with folding roof
merton Replies: 1 Views: 6272	Forum: Audi Cabriolet Posted: Wed Nov 27, 2013 6:31 pm Subject: Electrical issue with folding roof
merton Replies: 1 Views: 6272	try this, http://translate.googleusercontent.com/translate_c?depth=1&hl=en&prev=/search%3Fq%3Daudi%2Bcabrio%2Bforum%26rls%3Dcom.microsoft:en-gb:IE-Address%26rlz%3D1I7HPEA_en-GBGB231%26biw%3D10 ...
Topic: Oil pressure on VDO gauge >5bar, even when warm. Please h
merton Replies: 4 Views: 7798	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Mon Nov 25, 2013 9:08 pm Subject: Oil pressure on VDO gauge >5bar, even when warm. Please h
merton Replies: 4 Views: 7798	hi and welcome, sorry i cant ell you about the wiring and common problems for the gauges, but im guessing that as its only one of the gauges playing up it probably the sendor not the wiring loom, here ...
Topic: Finding out which alarm is fitted for my insurance
merton Replies: 4 Views: 9383	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Mon Nov 25, 2013 8:34 pm Subject: Finding out which alarm is fitted for my insurance
merton Replies: 4 Views: 9383	the alarm control unit is either next to the alarm horn on a mounting plate or the alarm ecu is built in with the central locking pump and infrared keyfob locking system, i dont know if audi can get t ...
Topic: A/C retrofit
merton Replies: 19 Views: 34864	Forum: Audi Cabriolet Posted: Fri Nov 22, 2013 9:51 pm Subject: A/C retrofit
merton Replies: 19 Views: 34864	did you get a quote? how much?
Topic: Alignment Audi 80 1.9tdi Avant
merton Replies: 4 Views: 13707	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Fri Nov 22, 2013 6:35 pm Subject: Alignment Audi 80 1.9tdi Avant
merton Replies: 4 Views: 13707	As you are doing all the front, have you done the rear mounts / bushes? the play in the rear axle on my original bushes was terrible, now i have fitted poly bushes the axle is solid, try jacking up th ...
Topic: [Audi 80 B4 '93 2.0E] some interior and light problems..
merton Replies: 6 Views: 20494	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Fri Nov 22, 2013 5:53 pm Subject: [Audi 80 B4 '93 2.0E] some interior and light problems..
merton Replies: 6 Views: 20494	the L E D where the same T5 type bulb from ebay,like this http://www.ebay.co.uk/itm/10x-White-T5-286-LED-Bulbs-Dash-Speedo-Cig-Lighter-/261312439888?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3 ...
Topic: [Audi 80 B4 '93 2.0E] some interior and light problems..
merton Replies: 6 Views: 20494	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Wed Nov 20, 2013 10:08 pm Subject: [Audi 80 B4 '93 2.0E] some interior and light problems..
merton Replies: 6 Views: 20494	the door contacts are easy to check, just remove rubber then one screw, maybe the wire goes from one switch to the next and is broken? i used l e d bulbs for my demist/hazard switches and maybe you ...
Topic: [Audi 80 B4 '93 2.0E] some interior and light problems..
merton Replies: 6 Views: 20494	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Tue Nov 19, 2013 7:00 pm Subject: [Audi 80 B4 '93 2.0E] some interior and light problems..
merton Replies: 6 Views: 20494	hi and welcome, i think the small parts that hold the centre of the steering wheel are hard to find, i have seen some on uk ebay but probably costs the same as a good second hand wheel. i think the d ...
Topic: Power steering pipe
merton Replies: 2 Views: 6820	Forum: Audi Cabriolet Posted: Sun Nov 17, 2013 9:21 pm Subject: Power steering pipe
merton Replies: 2 Views: 6820	try contacting audibits on ebay he may have the pipe you need, more info needed for anybody to work out what pipe you need, what engine? year?. some diagrams are general and not exact picures to every ...
Topic: A/C retrofit
merton Replies: 19 Views: 34864	Forum: Audi Cabriolet Posted: Sat Nov 16, 2013 9:27 pm Subject: A/C retrofit
merton Replies: 19 Views: 34864	all the internal stuff yes, most engine hardware wont matter, but all the piping and fittings will have to be for the LHD, so you need a LHD same engine and close year match for a retro fit,
Topic: Servicing troubles!!
merton Replies: 5 Views: 11868	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Sat Nov 16, 2013 9:20 pm Subject: Servicing troubles!!
merton Replies: 5 Views: 11868	i found the fuel filter bolts needed another tighten when i did mine, normal open ended spanners are just about ok, flare nut spanners make it easier . think the torque spec is 25 - 30 nm
Topic: A/C retrofit
merton Replies: 19 Views: 34864	Forum: Audi Cabriolet Posted: Fri Nov 15, 2013 9:54 pm Subject: A/C retrofit
merton Replies: 19 Views: 34864	i am guessing but i think the air con system must be the same in the 80 saloon and coupe for the same year, you will just have to look for a 2.3l to get what you want.
Topic: No vacuum assist and no servo assist?
merton Replies: 24 Views: 54433	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Mon Nov 11, 2013 8:13 pm Subject: No vacuum assist and no servo assist?
merton Replies: 24 Views: 54433	there are only three things it can be, the bomb, the hydrualic servo or the pas/hydrualic system pump, assuming the calipers and hydro pipes are fine. maybe the switch/sensor for the brake/hydro press ...
Topic: A/C retrofit
merton Replies: 19 Views: 34864	Forum: Audi Cabriolet Posted: Sun Nov 10, 2013 7:52 pm Subject: A/C retrofit
merton Replies: 19 Views: 34864	no is the quick answer, most parts are good but you need all the bits for the 5 cyl engine, the 4 cly is very different, i think all the stuff inside the car will be fine but the engine stuff wont wor ...
Topic: A/C retrofit
merton Replies: 19 Views: 34864	Forum: Audi Cabriolet Posted: Sun Nov 10, 2013 4:41 pm Subject: A/C retrofit
merton Replies: 19 Views: 34864	you colud buy something like this http://www.ebay.co.uk/itm/Audi-80-Full-Air-Con-System-2-6-V6-2-8-V6-Coupe-Avant-Cabriolet-Breaking-Car-/360788046084?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=ite ...
Topic: New owner of a byzanz purple coupe
merton Replies: 3 Views: 10297	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Tue Nov 05, 2013 8:35 pm Subject: New owner of a byzanz purple coupe
merton Replies: 3 Views: 10297	i think you need the sub frame ,drive shafts and shocks/springs /struts for the 2.0e to v6 swap dont know if fuel pump is the same pressure and where is the battery on the v6? i know the 2.0e 8v and 1 ...
Topic: heater matrix removal
merton Replies: 5 Views: 12553	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Sat Nov 02, 2013 4:31 pm Subject: heater matrix removal
merton Replies: 5 Views: 12553	one extra thing i would do whilst the heater box is out is have a good look at the control flaps because the foam stuff on them crumbles/ falls apart and then you just get warm air going everywhere, w ...
Topic: Audi cabriolet 1999 starting problems
merton Replies: 2 Views: 6252	Forum: Audi Cabriolet Posted: Sat Oct 26, 2013 8:03 pm Subject: Audi cabriolet 1999 starting problems
merton Replies: 2 Views: 6252	have you tried an engine diagnostic fault read? i know the ecu temp sensor can cause similar problems with other audi models of same age. hows all the usual leads, plugs, vacuum hoses, etc ? try this ...
Topic: Front headlight 2.6 1995 coupe
merton Replies: 4 Views: 9229	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Sat Oct 26, 2013 3:04 pm Subject: Front headlight 2.6 1995 coupe
merton Replies: 4 Views: 9229	dont know what type of lights your looking for but think the ones from this are right? http://www.ebay.co.uk/itm/Audi-80-Avant-Quattro-/231081668205?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3 ...
Topic: Front headlight 2.6 1995 coupe
merton Replies: 4 Views: 9229	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Thu Oct 24, 2013 10:16 pm Subject: Front headlight 2.6 1995 coupe
merton Replies: 4 Views: 9229	i didn't think the parts would be so hard to find, there is a guy on ebay that breaks audi 80 coupes regularly called audibits, i have messaged him for parts not listed and he has been helpful, dont k ...