Search found 436 matches

No sure go ahead. There is also some good info in my thread here [url=http://www.classic-audi.co.uk/forum/showthread.php?t=18107&page=4] Click ME

I think so as thats what Im using. The only difference is I used the gearbox they came off too. I am 98% sure that the gearbox flanges are the same. Maybe someone can confirm that??

I have just done it on my coupe that had a 2.0 16v. The best way is to get hubs from an s2 including carriers and driveshafts with cv joints from a 7a or s2. Backs are a case of using A4 items but i ...

No sorry mate, I sold them to Unicom but he had problems with one of the calipers. The discs and pads were like new tho.

Hi

Im just in the process of removing the whole front break setup from my 16v coupe. The calipers are in good condition as are the discs and pads, the discs are quite new actually.

I can sell y ...

I made one for my coupe, was pretty involved, here is my project thread - LINKhttp://i248.photobucket.com/albums/gg171/SFJIM/Car%20Mods/DSC00494.jpg

There are pics of all the associated parts I had ...

Definately sounds like a boost hose to me. Check all pipes really well failing that do a pressure test on the boost system.

Ok been meaning to put this up for ages. Back at the end of may/ begining of june i finally fitted the tubular manifold. Unfortunately i dont have a lot of pics of the process as i was in a little r ...

That looks bl00dy fantastic!! All it needs now are some coupe headlights!

Get the tracking and the castor/camber checked too. You have lowered it yes? The lower arms are now sitting at a different angle to what they were before. This will be making your wheel sit at a di ...

They arn't easy to get out even on a ramp. I used a puller to pul the bushes out. Once they are out the powerflex ones are a doddle to fit.

This forum is great but there is a whole load of knowledge to be had over on the s2forum. The guys on there live and breath every part of these cars and you will find all the info you are after.

Yeah, get them from your local audi or TPS. They not much more expensive than from gsf. Although i recently remved a set from gsf and they had what looked like audi marks on the rubbers?!

Get the ...

Hi stuart. Very nice looking motor you have there.

Im not sure on kent cams so i cant comment but there was 2 versions of the 16v engine. Yours should be the ACE there was also the earlier 6a.
...

Yeah gsf sold the shocks i think, could of been euro car parts but think it was gsf.

With the springs speak to the guys at venom motorsport, they are very clued up. Some of the not so well known ...

Hi. The supersport kit i got from venom motorsport, Think it was around £170. It is great for the money. It is a little harsh sometimes but most of the time it is fine. I think if the shocks ever ...

Hi, not had time to read your complete post, will do 2mora.

I have however just replaces all the suspension on my coupe 2.0 16v with a super sport kit.

I have all the bits i took off which most ...

I would take the tires off, then find somewhere and get them blasted with a fine grade of bead blast. Then paint them yourself.

The front door cards are easy enough to get off about 10 mins per side. There is a thread on here somewhere on how to do it. Be careful as the clips on the back can break.

The rears are a little ...

Hi mate. You have to take the door cards off. They have little clip things on the back. Sorry i cant describe any better. You will see what i mean when you get the door cards off. Very Happy

A trick i have used on bikes before to see if there is an air leak is to squirt carb cleaner around pipes etc that may have a split or causing an air leak. If there is an air leak the carb cleaner wi ...

Hi guys i just posted a wanted ad in the parts wanted section. Is there anyone breaking a 2ltr coupe at the moment. I need a power steering pump pretty soon. See the wanted section.

Many thanks ...

You could do those lights yourself jase. Get some black paint and take the lenses off.

lol i was looking for this post, this was me on my dads account. Looking good jase Very Happy

that looks great Cool

Lol, i found that branding quite funny too. But my i just fitted a supersport kit to my coupe and i am very pleased with it. I spoke to the guys at Venom motorsport and told them my requirements and ...

Ahh i see, good option then, i thought you had sprayed it. I did the one on my dads S6 used plasticote enamel paint, i have fount it really good, needs a real good rub down first tho.

Ahh, extra Komfort! lol

Is the grill not nearly the same as the one you have? They both look like they have 4 bars the only real differance is the new one doesnt have rings or the seat for them bu ...

That is a right bargain!!! Nice one.

I have a right click box in my coupe and it works spot on every time! I even moved it from the inner rear wing to under the dash to incorperate the factory al ...

Nah dont think it was me then, they were on ebay and advertised as ford fitment lol.

Cant remember, might of done, why?

Author	Message
Topic: 5 stud conversion on a 4 cylinder coupe
bikerjim Replies: 14 Views: 14679	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Tue Jul 19, 2011 12:28 pm Subject: 5 stud conversion on a 4 cylinder coupe
bikerjim Replies: 14 Views: 14679	No sure go ahead. There is also some good info in my thread here [url=http://www.classic-audi.co.uk/forum/showthread.php?t=18107&page=4] Click ME
Topic: 5 stud conversion on a 4 cylinder coupe
bikerjim Replies: 14 Views: 14679	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Mon Jul 18, 2011 5:32 pm Subject: 5 stud conversion on a 4 cylinder coupe
bikerjim Replies: 14 Views: 14679	I think so as thats what Im using. The only difference is I used the gearbox they came off too. I am 98% sure that the gearbox flanges are the same. Maybe someone can confirm that??
Topic: 5 stud conversion on a 4 cylinder coupe
bikerjim Replies: 14 Views: 14679	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Wed Jun 29, 2011 11:34 am Subject: 5 stud conversion on a 4 cylinder coupe
bikerjim Replies: 14 Views: 14679	I have just done it on my coupe that had a 2.0 16v. The best way is to get hubs from an s2 including carriers and driveshafts with cv joints from a 7a or s2. Backs are a case of using A4 items but i ...
Topic: 16V Coupe Front Calipers
bikerjim Replies: 8 Views: 10527	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Sun Jun 26, 2011 3:47 pm Subject: 16V Coupe Front Calipers
bikerjim Replies: 8 Views: 10527	No sorry mate, I sold them to Unicom but he had problems with one of the calipers. The discs and pads were like new tho.
Topic: 16V Coupe Front Calipers
bikerjim Replies: 8 Views: 10527	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Sat Jun 04, 2011 9:20 am Subject: 16V Coupe Front Calipers
bikerjim Replies: 8 Views: 10527	Hi Im just in the process of removing the whole front break setup from my 16v coupe. The calipers are in good condition as are the discs and pads, the discs are quite new actually. I can sell y ...
Topic: 'Fitted at last,piccy's of my V6 bumper'
bikerjim Replies: 22 Views: 22704	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Fri May 06, 2011 8:48 am Subject: 'Fitted at last,piccy's of my V6 bumper'
bikerjim Replies: 22 Views: 22704	I made one for my coupe, was pretty involved, here is my project thread - LINKhttp://i248.photobucket.com/albums/gg171/SFJIM/Car%20Mods/DSC00494.jpg There are pics of all the associated parts I had ...
Topic: loss of power nd got a fairly loud whistling sucking sound
bikerjim Replies: 7 Views: 12744	Forum: Technical Posts Posted: Wed Jan 05, 2011 7:05 pm Subject: loss of power nd got a fairly loud whistling sucking sound
bikerjim Replies: 7 Views: 12744	Definately sounds like a boost hose to me. Check all pipes really well failing that do a pressure test on the boost system.
Topic: OEM+ Coupe 16v
bikerjim Replies: 62 Views: 156115	Forum: Projects Posted: Mon Nov 22, 2010 11:04 pm Subject: OEM+ Coupe 16v
bikerjim Replies: 62 Views: 156115	Ok been meaning to put this up for ages. Back at the end of may/ begining of june i finally fitted the tubular manifold. Unfortunately i dont have a lot of pics of the process as i was in a little r ...
Topic: Transformation of my 1990 Audi 80
bikerjim Replies: 35 Views: 99842	Forum: Projects Posted: Mon Oct 11, 2010 8:21 pm Subject: Transformation of my 1990 Audi 80
bikerjim Replies: 35 Views: 99842	That looks bl00dy fantastic!! All it needs now are some coupe headlights!
Topic: Audi Coupe 2ltr 16v - Suspension (Leaking shock)
bikerjim Replies: 77 Views: 46650	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Mon Oct 04, 2010 7:53 am Subject: Audi Coupe 2ltr 16v - Suspension (Leaking shock)
bikerjim Replies: 77 Views: 46650	Get the tracking and the castor/camber checked too. You have lowered it yes? The lower arms are now sitting at a different angle to what they were before. This will be making your wheel sit at a di ...
Topic: Audi Coupe 2ltr 16v - Rear beam removal/Bush replacement
bikerjim Replies: 7 Views: 5247	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Wed Sep 22, 2010 10:32 am Subject: Audi Coupe 2ltr 16v - Rear beam removal/Bush replacement
bikerjim Replies: 7 Views: 5247	They arn't easy to get out even on a ramp. I used a puller to pul the bushes out. Once they are out the powerflex ones are a doddle to fit.
Topic: S2 ABY rebuild
bikerjim Replies: 6 Views: 7437	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Mon Sep 20, 2010 8:20 am Subject: S2 ABY rebuild
bikerjim Replies: 6 Views: 7437	This forum is great but there is a whole load of knowledge to be had over on the s2forum. The guys on there live and breath every part of these cars and you will find all the info you are after.
Topic: Audi Coupe 2ltr 16v - Suspension (Leaking shock)
bikerjim Replies: 77 Views: 46650	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Tue Sep 14, 2010 7:42 pm Subject: Audi Coupe 2ltr 16v - Suspension (Leaking shock)
bikerjim Replies: 77 Views: 46650	Yeah, get them from your local audi or TPS. They not much more expensive than from gsf. Although i recently remved a set from gsf and they had what looked like audi marks on the rubbers?! Get the ...
Topic: 2.0 16v ACE - Kent cam kit
bikerjim Replies: 2 Views: 7027	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Mon Sep 13, 2010 9:59 am Subject: 2.0 16v ACE - Kent cam kit
bikerjim Replies: 2 Views: 7027	Hi stuart. Very nice looking motor you have there. Im not sure on kent cams so i cant comment but there was 2 versions of the 16v engine. Yours should be the ACE there was also the earlier 6a. ...
Topic: Audi Coupe 2ltr 16v - Suspension (Leaking shock)
bikerjim Replies: 77 Views: 46650	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Mon Sep 13, 2010 9:40 am Subject: Audi Coupe 2ltr 16v - Suspension (Leaking shock)
bikerjim Replies: 77 Views: 46650	Yeah gsf sold the shocks i think, could of been euro car parts but think it was gsf. With the springs speak to the guys at venom motorsport, they are very clued up. Some of the not so well known ...
Topic: Audi Coupe 2ltr 16v - Suspension (Leaking shock)
bikerjim Replies: 77 Views: 46650	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Sun Sep 12, 2010 8:30 pm Subject: Audi Coupe 2ltr 16v - Suspension (Leaking shock)
bikerjim Replies: 77 Views: 46650	Hi. The supersport kit i got from venom motorsport, Think it was around £170. It is great for the money. It is a little harsh sometimes but most of the time it is fine. I think if the shocks ever ...
Topic: Audi Coupe 2ltr 16v - Suspension (Leaking shock)
bikerjim Replies: 77 Views: 46650	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Sun Sep 12, 2010 7:35 pm Subject: Audi Coupe 2ltr 16v - Suspension (Leaking shock)
bikerjim Replies: 77 Views: 46650	Hi, not had time to read your complete post, will do 2mora. I have however just replaces all the suspension on my coupe 2.0 16v with a super sport kit. I have all the bits i took off which most ...
Topic: DIY wheel refurb - Are these beyond help?
bikerjim Replies: 21 Views: 34105	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Mon Aug 09, 2010 10:15 pm Subject: DIY wheel refurb - Are these beyond help?
bikerjim Replies: 21 Views: 34105	I would take the tires off, then find somewhere and get them blasted with a fine grade of bead blast. Then paint them yourself.
Topic: Wood effect door trims?
bikerjim Replies: 11 Views: 13502	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Thu Aug 05, 2010 9:00 am Subject: Wood effect door trims?
bikerjim Replies: 11 Views: 13502	The front door cards are easy enough to get off about 10 mins per side. There is a thread on here somewhere on how to do it. Be careful as the clips on the back can break. The rears are a little ...
Topic: Wood effect door trims?
bikerjim Replies: 11 Views: 13502	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Tue Aug 03, 2010 11:19 pm Subject: Wood effect door trims?
bikerjim Replies: 11 Views: 13502	Hi mate. You have to take the door cards off. They have little clip things on the back. Sorry i cant describe any better. You will see what i mean when you get the door cards off.
Topic: Audi Coupe 2ltr 16v (ACE) 1993 - ISV cleaning
bikerjim Replies: 14 Views: 17012	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Wed Jul 28, 2010 9:33 am Subject: Audi Coupe 2ltr 16v (ACE) 1993 - ISV cleaning
bikerjim Replies: 14 Views: 17012	A trick i have used on bikes before to see if there is an air leak is to squirt carb cleaner around pipes etc that may have a split or causing an air leak. If there is an air leak the carb cleaner wi ...
Topic: Power steering pump help
bikerjim Replies: 0 Views: 2670	Forum: Series 3 and 4: 80, 90, Coupe, Avant, S2, RS2 Posted: Thu May 27, 2010 7:30 pm Subject: Power steering pump help
bikerjim Replies: 0 Views: 2670	Hi guys i just posted a wanted ad in the parts wanted section. Is there anyone breaking a 2ltr coupe at the moment. I need a power steering pump pretty soon. See the wanted section. Many thanks ...
Topic: Return of a former forum A6. Project Bus.
bikerjim Replies: 164 Views: 329278	Forum: Projects Posted: Mon May 24, 2010 10:03 pm Subject: Return of a former forum A6. Project Bus.
bikerjim Replies: 164 Views: 329278	You could do those lights yourself jase. Get some black paint and take the lenses off. lol i was looking for this post, this was me on my dads account. Looking good jase
Topic: Return of a former forum A6. Project Bus.
bikerjim Replies: 164 Views: 329278	Forum: Projects Posted: Thu May 20, 2010 9:03 pm Subject: Return of a former forum A6. Project Bus.
bikerjim Replies: 164 Views: 329278	that looks great
Topic: Return of a former forum A6. Project Bus.
bikerjim Replies: 164 Views: 329278	Forum: Projects Posted: Wed May 05, 2010 9:57 am Subject: Return of a former forum A6. Project Bus.
bikerjim Replies: 164 Views: 329278	Lol, i found that branding quite funny too. But my i just fitted a supersport kit to my coupe and i am very pleased with it. I spoke to the guys at Venom motorsport and told them my requirements and ...
Topic: Return of a former forum A6. Project Bus.
bikerjim Replies: 164 Views: 329278	Forum: Projects Posted: Mon May 03, 2010 8:51 pm Subject: Return of a former forum A6. Project Bus.
bikerjim Replies: 164 Views: 329278	Ahh i see, good option then, i thought you had sprayed it. I did the one on my dads S6 used plasticote enamel paint, i have fount it really good, needs a real good rub down first tho.
Topic: Return of a former forum A6. Project Bus.
bikerjim Replies: 164 Views: 329278	Forum: Projects Posted: Mon May 03, 2010 8:30 pm Subject: Return of a former forum A6. Project Bus.
bikerjim Replies: 164 Views: 329278	Ahh, extra Komfort! lol Is the grill not nearly the same as the one you have? They both look like they have 4 bars the only real differance is the new one doesnt have rings or the seat for them bu ...
Topic: Return of a former forum A6. Project Bus.
bikerjim Replies: 164 Views: 329278	Forum: Projects Posted: Sun May 02, 2010 8:06 pm Subject: Return of a former forum A6. Project Bus.
bikerjim Replies: 164 Views: 329278	That is a right bargain!!! Nice one. I have a right click box in my coupe and it works spot on every time! I even moved it from the inner rear wing to under the dash to incorperate the factory al ...
Topic: OEM+ Coupe 16v
bikerjim Replies: 62 Views: 156115	Forum: Projects Posted: Sun May 02, 2010 4:20 pm Subject: OEM+ Coupe 16v
bikerjim Replies: 62 Views: 156115	Nah dont think it was me then, they were on ebay and advertised as ford fitment lol.
Topic: OEM+ Coupe 16v
bikerjim Replies: 62 Views: 156115	Forum: Projects Posted: Sat May 01, 2010 12:28 pm Subject: OEM+ Coupe 16v
bikerjim Replies: 62 Views: 156115	Cant remember, might of done, why?